Flamina

Single phase water heater Flamina Multi is an instantaneous water heater that warms up the water as it flows through the appliance. Flamina Multi is a protracted water heater that works under pressure and maintains the entire plumbing installation at your home, office or enterprise. It provides hot water at every point (tap or shower) of your plumbing water-main. Hence, Flamina Multi is a multipoint (multitargetted) protracted water heater with instantaneous action. Flamina Multi has an integrated sensor for flowing water. When you open the hot water faucet anywhere in your plumbing installation, the sensor activates the electrical heater and the water warms up immediately. Flamina Multi is secured by two levels of thermal safety cut-off devices. Flamina Multi complies with the European safety standards. Multi 1 Multi 1 is manufactured in three modifications, depending on the heating capacity - 6500 W, 7500 W and 9000 W. The heater is divided into three sections of equal power - for instance, a 7500 - watt heater is divided into three sections of 2500W. Every section can be turned on and off by switches installed at the front, giving the opportunity to control the maximum power of the appliance. A light in the switches turns on when the repsective section is in use and water is being heated up. Another light on the front panel, next to the switches turns on when the appliance is connected to a power source. TECHNICAL DATA Power supply: 220-240 V / 50 Hz Power output: 6.5 kW, 7.5 kW, 9 kW Water supply pressure: 0.15 / 0.8 МРа Water tank: AISI 304 Dimensions: 424 х 240 х 190 (H х W х D) Multi 3 Multi 3 is manufactured in four modifications, depending on the maximum heating capacity - 15kW, 18 kW, 21 kW and 24 kW. A switch at the front, marked with I and 0 turns on the appliance. A second switch, marked with I and II controls the modes of operation. An indicator in the heater detects water flowing through any hot-water faucet in the plumbing installation. The heaters switch to mode I at flow of 2.4 L/min, and mode II when 5.7 L/min. Please note that the switch has to be in the mode corresponding to the current water flow. That is, the appliance will switch over to mode II only if switched to that mode. A signal light at the front turns on as soon as the appliance is connected to the power source. The reservoir of the heater is made of stainless steelAISI 304, 1.5 mm thick. Three-phase water heater Flamina Compact Flamina Compact Flamina Compact is a 20-liter water heater of stainless steel, with operational pressure of 0 bar. Flamina Compact comes together with special faucet and flexible nickel-plated copper tubing (pipes), especially chosen for sound and comfortable installation. The special faucet is designed to provide minimal operational pressure for the appliance. Flamina Compact has a thermostat with integrated safety cut-off. Flamina Compact complies with the European safety standards. TECHNICAL DATA Power supply: 220-240 V / 50 Hz Power output: 1500 W Water supply pressure: 0.15 / 0.8 Mpa Water tank: AISI 304 Dimensions: 420 x 320 x 250 (H x W x D)