CK-13 Kamenina JSC

CK-13 Kamenina JSC, Pleven was established in 1884 as a factory for brick production. Consequently the small factory turned into a plant, which comprises several modern equipped workshops. Mass - preparation and moulding machines, six - channel driers, a tunnel gas oven with CPU guarantee the high quality of the production. CK-13 Kamenina JSC, Pleven, affiliated company of CK - 13 Holding JSC is country - wide the only producer of acid - proof clay / stoneware pipes and all kind of facial product from O100 up to O400 mm; acid - proof bricks: К-1, К-2, К-4, К-6 and drips for coating chimneys, bathtubs and other equipment under special requirements; acid - proof tiles for coating chemical laboratories, battery - processing rooms, workshops, where aggressive materials are dealt with, ceramic tiles and clay - tiles of miscellaneous design for alleys, sidewalks and squares, which do not suffer the influence of the ambient conditions; ceramic rings for the metallurgy and the chemical industry. Clay / stoneware sewer pipes and facial product They are produced from half - acid, heavy - melting and lean materials - dried and baked at a definite temperature. They are waterproof commodities covered in- and outside with glaze. They are distinguished for a very high machinic hardiness, acid- and alkali - resistance. they are stable against aggressive sewage and have a small - grain structure. They don't retain layers, which could lead to diminishing of the clear aperture. Temperature changes do not influence them. They are used for the purpose of house, municipal and industrial canalization, for discharge of acid- and alkali - sewage coming from chemical works and laboratories. The bedding happens upon tramped ground or upon a sang - padding layer. The joint between the pipes is usually made of cement or elastic material (such as silicone, epoxy resins). Alkali - proof products Usual and facial bricks and tiles - made out of half - acid, heavy - melting clays and lean materials and baked at a definite temperature. They are of thick, hard - baked consistence, very high mechanic hardiness, gas- and liquid-, acid- and heat-resistant. They have a small - grain amorphous structure without cavities, outside insertions and deep clefts, reching the outer surfaces. They have a regular form with distinct edges. They are to be applied in apparatus, vessel, chimney and room coating, which wallsmare in touch with acids and acid vapours (excluding fluorohydrogen acid) in the chemistry, the metallurgy and the energetics. Clay - flag pavement Made out of clay mass by using half - acid heavy - melting clays and learning agents. They have an amorphous small - grain structure without outside insertions, craze and clefts. The working surface of the tiles is nonglazed and has a size according to the requirements and the aesthetic point of view of the client. The tiles are of high hardiness, endurance and frost - resistance, low water absorptiveness. Their colours is deep brown to reddish in some nuances. The clay - flag pavement is used for artful - architectural designing of squares, pedestrian precincts and other.